|
|
 ALC2
Controller/amplifier, 2x 1kW, SDP, SIS, ATCM
Technical specifications
| Input sensitivity |
1.4 Vrms(+5.2dBu) for full RMS power in 4 ohms |
| Max. input level |
+21dBu |
| Input impedance |
20 kOhm balanced |
| Frequency range |
@ 50W into 8 ohms
10 Hz .. 20kHz +0..-0.1dB
10 Hz .. 55kHz.+0..-3dB |
| Gain |
32dB (40x) |
| Channel separation |
>70 dB @ 1kHz., 50W into 8 ohms
>50 dB @ 20kHz., 50W into 8 ohms |
| Total harmonic distortion |
<0.015% @ 1KHz., 50W into 8 ohms
<0.2% @ 20kHz., 50W into 8 ohms |
| SMPTE IMD |
<0.03% @ 2kHz. - 10kHz. 50W into 8 ohms |
| Signal-to-noise ratio |
>108dB A-weighted |
| Slew rate |
>40V /uS |
| Damping factor |
10.000 @ 1kHz., 8 ohms |
| Output power (RMS/peak) |
@ 1 Khz. <0.5% THD
2x 535W / 2x 620W @ 8 ohms
2x 850W / 2x 1000W @ 4 ohms
2x 1120W / 2x 1440W @ 2 ohms |
| Output power bridge mode |
@ 1 Khz., <0.5% THD |
| (RMS/peak) |
1x 1070W / 1x 1240W @ 16 ohms
1x 1700W / 1x 2000W @ 8 ohms
1x 2240W / 1x 2880W @ 4 ohms |
| Main supply voltage |
stated at rear of amplifier |
| Power consumption |
75 VA (standby) 1100 VA 1/8 of maximum output power pinknoise in 2 ohms |
| Weight (approx.) |
21kg (46.3lb) |
| Housing |
19 inch rackmount, 3 HU,
386 mm/15.2 in. deep behind mounting surface,
without connectors |
| Dimensions (HxWxD) |
132 x 482 x 388 mm / 5.2 x 19 x 15.3 in.
without connectors and rack handles |
| Warranty |
3 years |
Se technical specs over ALC2, klik her
Se manual over ALC2, klik her
Tilbage
|
