FEATURES
- Active single 18” horn loaded subwoofer
- Last generation Digipro G4 Amp Technology
- 1600 W RMS class D DIGIPRO G4 amplifier with PFC
- System Auto-Test for quick diagnostics
- Integrated flying hardware (compatible with VIO L210)
- Designed for maximum efficiency in the lower end
- On board delay for perfect time alignement
- On board cardioid array configuration preset
- Modular slot for network and digital audio expansion cards
|
Technical Data |
|
|
Speaker Type |
Active Horn-Loaded Flyable Subwoofer |
|
Acoustical data |
|
|
Frequency Response (-6dB) |
36 Hz to Cut Freq (X-Over Dependent) |
|
Frequency Response (-10 dB) |
33 Hz (HPF) |
|
Max SPL |
139 dB |
|
LF |
1 x 18” Neodymium |
|
Voice Coil LF |
4” |
|
Directivity |
Omnidirectional |
|
Amplifier |
|
|
Amp Technology |
Digipro G4 |
|
Amp Class |
Class D |
|
RMS Power |
1600 W |
|
Peak Power |
3200 W |
|
Cooling |
Convection |
|
Power Supply |
1600 W with PFC |
|
Processor |
|
|
Controller |
DSP 32 |
|
AD/DA Converter |
24 bit 96 kHz |
|
Limiter |
RMS, Peak, Thermal |
|
Delay Option |
0-9.9 ms internal steps of 0.1 ms |
|
Crossover Frequency LF-HF |
60-110Hz + Full range |
|
LF-Xover out slope |
24 dB/Octave |
|
Input |
|
|
Signal Input |
1 x XLR balanced |
|
Signal Output |
1 x XLR balanced (link or X-over) 1 x RJ45 LINK (RDNET) |
|
Expansion Card |
1 x RJ45 IN (RDNET) 1 x RJ45 LINK (RDNET) |
|
Power Socket |
1 x PowerCON TRUE1 IN 1 x PowerCON TRUE1 OUT |
|
Controls |
1 x Input Attenuation Rotary Switch 1 x Rotary Encoder (Delay 9.9 ms) 1 x Polarity Inversion Switch (0” or 180”) 1 x Cardioid Mode Switch 1 x X-Over Freq Switch (60-110 Hz + Full Range) 1 x System Auto-test |
|
Mechanics |
|
|
Housing |
Multiplex plywood Polyurea painted |
|
Handles |
2x Per Side Aluminium |
|
Pole Mount |
M20 Thread |
|
Raincover |
Included |
|
Rigging Points |
2xPick Points on top to fix DRK-210 rigging frame (stack use) 4x Pick Points on top and 4x on bottom for rigging |
|
Dimensions (WxHxD) |
720x520x695 mm |
|
Weight |
45,1 kg |