The semi-horn loaded subwoofer DVA KS10 is equipped with a single 18″ woofer driven by a Class-D Digipro@G3 power amp delivering 2000W Peak and reaching 134 dB SPL. Maximun versatility is granted by a stereo input/output balanced pre-amp. Crucially, KS10 can be used as a compact PA system (together with DVA K5 on a speaker pole) or groundstacked, but can also be flown thanks to the optionally available flyware. A dedicated encoder aloows to apply up to 4.5 ms of delay, with 0.5 ms speps. A switch allows to invert the phase by 180° as well as changing the LPF from 90 Hz to 120 Hz.
FEATURES
- FLYABLE ACTIVE SEMI-HORN-LOADED SUBWOOFER
- 900W RMS DIGIPRO G3 AMP TECHNOLOGY
- 134 dB MAX SPL
- FREQUENCY RESPONSE [-10 dB]: 41 Hz – 120 Hz
- LF: 1 x 18”, 4” v.c.
- Weight: 43.4 kg (95.69 lbs)
Technical Data
Speaker Type: Active Semi-horn loaded Flyable Subwoofer
Acoustical data
Frequency Response [- 10 dB]: 41 Hz – 120 Hz
Max SPL: 134 dB
Directivity: Omnidirectional
LF: 18 “
Voice Coil LF: 4 “
Amplifier
Amp Technology: Digipro® G3
Amp Class: Class D
RMS Power: 900 W
Peak Power: 1800 W
Cooling: Convection
Power Supply: 900 W SMPS with auto range PSU
Processor
Controller: DSP 56 Bit
AD/DA COnverter: 24 Bit / 48 KHz
Limiter: Dual Active Multiband RMS, Peak, Thermal
Crossover Frequency LF-HF: 90, 120 Hz (selectable)
Slope LF-HF: 24 dB/Octave
Input
Input Section: 2X XLR Balanced
Output Section: 2x XLR Balanced
Power Sockets: 1 x Powercon In + – 1 x Powercon Out
Controls: 1 x Input Sensitivity Rotary Switch – 1 x DSP Rotary (up to 4.5 ms on-board) – 1 x Polarity Inversion Switch (0°-180°) – 1 x X-Over Frequency Switch (90 Hz, 120Hz) – 1 x Output Mode Switch (Link – X-Over)
Mechanics
Housing: Multiplex plywood
Handles: 2x Side
Pole Mount: 1x M20 on top
Rigging Points: 2xPick Points on top to fix DRK 10/20 rigging frames
Width: 515 mm
Height: 640 mm
Depth: 720 mm
Weight: 43.4 kg
