FEATURES
- 2X 18” NEODYMIUM WOOFERS
- 3200W RMS DIGIPRO G4 AMP TECHNOLOGY
- FULL RANGE SMPS WITH PFC
- SMPS 380V RESISTANT
- FREQUENCY RANGE EXTENDING DOWN TO 28 HZ (-6DB)
- OPTO-ISOLATED FLOATING PREAMP BOARD
- MODULAR SLOT FOR NETWORK AND DIGITAL AUDIO EXPANSION CARDS
- ON BOARD DELAY UP TO 9.9MS
- CARDIOID STACK PRESET BUTTON
- NFC™ + FRONT LED IDENTIFICATION SYSTEM
- SYSTEM TEST FOR QUICK TRANSDUCERS DIAGNOSTICS
- IPOS INTELLIGENT POWER-ON SEQUENCE
- FULL COMPATIBILITY WITH VIO S318 ACCESSORIES
- RDNET CARD INSTALLED
|
Technical Data |
|
|
Speaker Type |
Active Bass Reflex Subwoofer |
|
Acoustical data |
|
|
Frequency Response (-6dB) |
28 Hz to Cut Freq (X-Over Dependent) |
|
Frequency Response (-10 dB) |
27 Hz (HPF) |
|
Max SPL |
139 dB |
|
LF |
2 x 18” |
|
Voice Coil LF |
4” |
|
Directivity |
Omnidirectional |
|
Amplifier |
|
|
Amplifier |
3200 W RMS (2×1600 W RMS Class-D Digipro G4) |
|
Cooling |
Passive convection, internal fan |
|
Power Supply |
Full-range PSU with PFC (100V-240V, 50-60Hz) |
|
Processor |
|
|
Controller |
DSP 32 Bit |
|
AD/DA Converter |
24 bit/96 kHz |
|
Limiter |
RMS, Peak, Thermal |
|
Delay Option |
0-9.9 ms internal – steps og 0.1 ms (on-board) |
|
Crossover Frequency LF-HF |
Selectable 60-110Hz + Full range (8 steps) |
|
LF-Xover out slope |
24 dB/Octave |
|
Input |
|
|
Signal Input |
1 x XLR balanced, 1xRJ45 Link (RDNet) |
|
Signal Output |
1 x XLR balanced, 1xRJ45 Link (RDNet) |
|
Power Socket |
1 x PowerCON TRUE1 IN 1 x PowerCON TRUE1 OUT |
|
Controls |
1 x Input Attenuation Rotary Encoder 2 x Delay Rotary Encoder (Delay 9.9 ms) 1 x Polarity Inversion Switch (0” or 180”) 1 x Cardioid Mode Switch 1 x X-Over Freq Rotary Encoder (8 steps) |
|
Special Features |
NFCTM and Frontal LED Identification System 380V Resistant SMPS IPOS Intelligent Power-On Sequence Opto-isolated floating pre-amp System Test (transducers diagnostics) |
|
Mechanics |
|
|
Housing |
Multiplex plywood Polyurea painted |
|
Handles |
4x side. Aluminium |
|
Raincover |
Included |
|
Rigging Points |
2x Pick Points on top for DRK-210 rigging frame |
|
Dimensions (WxHxD) |
1300x520x800 mm |
|
Weight |
85,6 kg |
