0

dBTechnologies VIO L1608 active speaker

Ring 9818 5066

⚠️ Varen på fjernlager, leveringstid 8-14 dage

Varenr.: VIO L1608Kategorier: VIO L1608, VIO L1608Tags: VIO LBrand: dBTechnologies

VIO L1608 is a 3-way, tri-amplified active line array module that delivers dramatic output, refined clarity and consistent coverage from a deceptively compact footprint. It advances dBTechnologies’ research into precision-scaled acoustic architecture — in simpler words, bringing three-way performance to an enclosure the size of a traditional 2-way dual-8″ array.
The enclosure contains dual 8-inch neodymium LF drivers, and a coaxial MF–HF driver – with a low crossover point around 600 Hz – which is assembled on an optimized waveguide, producing a stable horizontal response and a natural midrange character across the listening field. Side-Firing Bassreflex Port geometry enhances internal airflow and acoustic loading, supporting output performance that far exceeds expectations for the cabinet’s reduced physical volume.
Designed for real-world production demands, VIO L1608 incorporates several engineering principles that shaped the success of the VIO L1610, adapted here for the dual-8″ platform. This includes improved environmental protection, an enhanced 3-point rigging system for faster deployment and current-generation VIO technologies such as inclinometer integration, opto-isolated preamps, NFC-assisted positioning, and a bright front ID LED for positioning and identification.
For the first time in a VIO module, the award-winning A2Net protocol is included as a standard feature, enabling high-resolution digital audio distribution and complete Aurora Net control. As part of the VIO ecosystem, L1608 benefits from matched phase response, latency and sensitivity across systems running firmware 2.0 or later, allowing seamless integration with VIO L1610, L212 and other modules in the platform. The new DRK-28 flybar supports both flown and stacked configurations and transports on the dolly, simplifying logistics and reinforcing a unified deployment workflow.
With its distinct acoustic architecture, deceptively compact footprint and dramatic output, VIO L1608 represents an evolution for compact professional sound reinforcement.

FEATURES
  • 3-WAY TRI-AMPED ACTIVE LINE ARRAY MODULE
  • 1600 W RMS
  • 138.5 dB MAX SPL
  • USABLE BANDWIDTH [- 6 dB] 75 Hz – 18 KHz
  • DANTE & A2NET READY
  • HF: 1×1.4″ exit, 3″-2″ v.c., coax NEODYMIUM
  • LF: 2 x 8”, 2.5” v.c. – NEODYMIUM
Technical Data
Speaker Type: 3-way Active Line Array Module
Acoustical data
Usable Bandwidth [- 10 dB]: 67 Hz – 20 KHz
Frequency Response [+/- 6dB]: 75 Hz -18 KHz
Max SPL: 138.5 dB (AES75)** – 137.5 dB
HF: 1×1.4″
Voice Coil HF: 3″ -2″ coaxial
Type HF: Neodymium
LF: 2×8″
Voice Coil LF: 2.5″
Type LF: Neodymium
Horizontal Directivity: 110°
Vertical Directivity: depends on array size and configuration
Amplifier
Amp Class: Class-D with PFC
Power RMS: 1600 W (4×400 W)
Peak Power: 3200 W
Cooling: Convection
Processor
DSP: 32 bit 96 KHz audio processor
AD/DA Converter: 24 bit/96 KHz
Limiter: Dual Active Peak, RMS, Thermal
Processing (filters): FIR Linear Phase Filters
Crossover Frequency LF-HF: 650Hz – 4500Hz
Input
Signal Input: 1xXLR fem, Bal.
Signal Output: 1xXLR male, Bal.
Network: RDNet remote control RJ45 connector IN/OUT
Mains Connections: 1x PowerCON TRUE1 In – 1x PowerCON TRUE1 Out
Controls: 1 switch System test – 2 rotary encoder (DSP preset) – Led MUTE/PROT – Led READY – Led SIGNAL – Led LIMITER – LED TEST – (A2Net card) – Led LINK – Led ACTIVE – Led PRESET – Led DIGITAL AUDIO
Mechanics
Housing: Multiplex Plywood – Polyurea painted
Handles: 1 x Side, 2 on back
Rain Cover: Included
Rigging Points: Integrated 3-point flying hardware
Width: 600 mm
Height: 260 mm
Depth: 390 mm
Weight: 22 Kg

Vælg et Afhentningssted