Designed for ground stacked applications, SUB 900 is the perfect choice whenever a powerful lower extension is required.
SUB 915 is equipped with a single premium 15″ woofer housed in a bass-reflex design.
A 900 W RMS Class D Digipro G3 power amplifier ensures advanced efficiency as well as forcible sound pressure levels
SUB 915 is enabled for real time monitoring and remote control via RDNet protocol and Aurora Net software (Windows and Mac), allowing advanced subwoofer configurations alongside with perfect low-end matches with dBTechnologies’ full-range systems enabled to RDNet communications.
Both models of the family also feature on-board controls for attenuation, a polarity switch and DSP controls for a delay up to 4.5 milliseconds with 0.5 milliseconds steps (while a maximum 21 ms delay is allowed via Aurora Net). A second rotary allows to set crossover frequency from 70 to 110 Hz.
The robust plywood cabinet encases high-end performances in limited weight (34.8 kg) and features 2 integrated handles on the top edges, while the back side is equipped with wheels mounting for smooth transportation.
What is more, being designed for both vertical or horizontal use, 2 M20 mounts on the top and side panels permits any type of full-range speaker led using a standard M20 threaded pole.
FEATURES
- Active Bass-reflex Subwoofers
- 900W RMS Digipro G3 Amp
- Up to 133 dB SPL
- Real time control via RDNet
- On-board delay control
- On-board crossover point control
- Designed to work vertically or horizontally
- Integrated top-edge handles
- 2x M20 threads on top and side
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 45 to cut frequency (Xover dependent)
Max SPL (1 m): 133 dB
LF: 15″
LF Voice Coil: 4″
Amplifier
Amp Technology: Digipro G3
Amp Class: Class D
Peak Power: 1800 W
Processor
Controller: 28/56 bit DSP
AD/DA Converter: 24 bit/48 Hz
Limiter: Peak, Thermal, RMS
Crossover Frequency: Variable (70Hz – 80Hz – 90 Hz – 100Hz – 110 Hz
Controls: 1x Subwoofer Atteniation Control – 1x Delay Rotary – 1xXover Rotary – 1x Polarity Switch
Input
Signal Input: 1x XLR female – 1x USB (data service)
Signal Output: 2x XLR male
Mechanics
Housing: Plywood
Handles: 2 (1x side)
Pole Mount: 2x M20 (1 on top + 1 on side)
Width: 620 mm (24.4 in)
Height: 457 mm (17.9 in)
Depth: 620 mm (24.4 in)
Weight: 34.8 kg (76.7 lbs)
