THE FIRST VIO COMPLEMENT FOR LOW FREQUENCIES
VIO S318 is equipped with three 18” bassreflex half-horn loaded woofers, configured in order to maximize frontal emission. The 3 voice coils are in facts mechanically aligned in order to achieve a perfect phase response. The 3 DIGIPRO G3 amplifiers deliver a total 2700 W RMS power, allowing the system to reach up to 143dB SPL.
The system features an integrated delay module achieving up to 9.9 ms delay with 0,5 ms steps. The crossover module sets the low pass filter alongside with the highpass filter for the integrated crossover output. The system also features an attenuation control, a polarity switch and a RDNet port for remote control.
The high quality multiplex housing is reinforced with a robust polyurea finishing and equipped with 5 aluminium handles per side.
The dolly transport DO-VIOS318 allows to transport up to 3 subs simultaneously, both on wheels or on lift track. As an alternative to the dolly, wheels can be mounted on the rear side of the cabinet.

 

FEATURES

• ACTIVE SEMI-HORN-LOADED SUBWOOFER
• 2700W RMS DIGIPRO® G3 AMPLIFIER
• 143 dB MAX SPL
• USABLE BANDWIDTH [- 6 dB]: 39 Hz to cut frequency
• LF: 3 x 18”, 4” v.c. – NEODYMIUM
• WEIGHT: 103.9Kg (229.06 lbs)

Technical Data
Speaker Type: Active Bassreflex Semi-Horn-Loaded Subwoofer

Acoustical data
Frequency Response [- 6 dB]: 39 Hz to Cut Freq (X-Over Dependent)
Frequency Response [- 10 dB]: 35 Hz (HPF)
Max SPL: 143 dB
LF: 3×18″
Voice Coil LF: 4 ”
Directivity: Omnidirectional

Amplifier
Amp Technology: Digipro® G3
Amp Class: Class D
RMS Power: 2700 W
Peak Power: 5400 W
Cooling: Convection
Power Supply: 2700 W SMPS with Auto Range PSU

Processor
Controller: DSP 32 bit
AD/DA Converter: 24 bit/96 KHz
Limiter: RMS, Peak, Thermal
Delay Option: 0-9.9 ms internal Steps of 0.1 ms
Crossover Frequency LF-HF: 70-105Hz + Full range
LF-Xover out slope: 24 dB/Octave

Input
Signal Input: 1xXLR balanced 1xRJ45 LINK (RDNet)
Signal Output: 1x XLR balanced 1xRJ45 LINK (RDNet)
Power Socket: 1xPowerCON TRUE1 IN 1xPowerCON TRUE1 OUT
Controls: 1x Input Attenuation Rotary Switch 2x Rotary Encoder (Delay 9.9 ms) 1XPolarity Inversion Switch (0° or 180°) 1xCardioid Mode Switch 1x X-Over Freq Switch (70-105 Hz + Full Range (steps of 5 Hz)

Mechanics
Housing: Multiplex plywood Polyurea painted
Handles: 4x Per Side Aluminium
Raincover: Included
Rigging Points: 2xPick Points on top to fix DRK-210 rigging frame
Width: 1300 mm
Height: 520 mm
Depth: 800 mm 
Weight: 103.9 kg